Sheet Metal Cabinets
Electrical, control and storage cabinets.
- Material
- Cold rolled · galvanized · stainless 304 / 316
- Typical gauge
- 16 – 12 ga (1.5 – 2.7 mm)
- Enclosure types
- NEMA 250 Type 1, 12, 4, 4X · IEC 60529 IP54 – IP66
- Standards
- IS/IEC 60529 · customer specification
Overview
Cabinets and enclosures are laser cut, formed, welded and powder coated, with doors, gaskets, mounting plates and hardware fitted.
Our capabilities
- 01Electrical and control enclosures
- 02Doors, gaskets and locks
- 03Mounting plates and rails
- 04Powder-coated finish
Technical data
| Material | Cold rolled · galvanized · stainless 304 / 316 |
|---|---|
| Typical gauge | 16 – 12 ga (1.5 – 2.7 mm) |
| Enclosure types | NEMA 250 Type 1, 12, 4, 4X · IEC 60529 IP54 – IP66 |
| Standards | IS/IEC 60529 · customer specification |
| Finish | Powder coat, RAL 7035 standard |
Values reflect common industry practice and referenced standards. Final values are set by your drawings and specification.
Our project approach
- 01
Submit drawings & specs
Send your drawings, specifications and quantities. DXF, DWG, STEP or PDF.
- 02
Proposal
A clear technical and commercial proposal with price, scope and delivery date.
- 03
Manufacturing
Fabrication, finishing and inspection to the agreed quality plan.
- 04
Shipping, delivery & local assembly
Delivered to your site, with assembly and installation support locally.
FAQs
What is the difference between NEMA and IP ratings?
NEMA 250 types describe protection against environmental conditions such as rain, dust, hose-down and corrosion, while IEC 60529 IP codes rate protection against solids and water only. A NEMA type can be mapped to a minimum IP code, but not the other way round.
Which enclosure standard applies in India?
Degree of protection is usually specified as an IP code to IS/IEC 60529, with switchgear and control gear enclosures also following the IS/IEC 61439 series. We build enclosures to the rating your specification calls for.
Who manufactures the parts?
Everything is engineered and made in-house at our own plant. We are part of the Ferrokshar Group, in production since 1997.
Who do I deal with?
Our engineering team is your single point of contact, from quote to delivery and after-sales service.
Further reading
Request a quote
Send your drawings and specifications. Our engineers will reply with a detailed proposal.